Sloan Crown 3522635 Rough Brass Hardwired Concealed Sensor Urinal Flushometer with Rear Spud Fixture Connection - 0.125 GPF

This Sloan Crown 3522635 rough brass finish concealed sensor urinal flushometer is a smart choice for urinals in your commercial restroom. Boasting a versatile rough brass finish that complements nearly any design aesthetic, this flushometer lends a subtle, modern accent to your urinal fixtures. It provides the quality and usability you expect and depend on, with a reliable piston valve and a valve body made from semi-red brass that accept low and ultra-low consumption pistons. It even comes with handle packing, a main seat, a stop seat, and a vacuum breaker that incorporate a PERMEX rubber compound for chloramine resistance. This flushometer is a great option for improving health and sanitation measures, as it uses an Optima self-adaptive infrared sensor with a range of 15" to 30" to provide touch-free operation. By using a sensor, you eliminate the urinal handle, which is a key contact point for germs to spread. This helps to make your business safer and more sanitary for guests and employees alike! The sensor is hardwired, so the flushometer is ready to use right out of the box. For your convenience, the flushometer is designed with a 3 second flush delay and a "walk by" 8 second delay to avoid unintentional flushing. To ensure your flushometer is operating at maximum capacity, it comes with all necessary hardware such a fixed metering bypass, vacuum breaker flush connection with one-piece bottom hex coupling nut, and type 316 stainless steel non-hold-open relief valve assembly. To improve water conservation, the flushometer does not allow for external volume adjustment. This single flush unit uses 0.125 GPF and has a 15-80 PSI flow rate. Additional features include a 3/4" IPS wheel handle Bak-Chek angle stop and a rear spud fixture connection with a 3/4" spud coupling. This flushometer requires a 3/4" supply pipe and 13 1/2" rough-in for use. Overall Dimensions: Rough-In: 13 1/2"